The New G-Mark eCertificates allow you to create the product and certificate at same time in one form and certificate will be generated automatically by the system.
To Access Certificate Listing Page click on “More” Menu in Home page and click on “GCTS” as shown below
You will ask for login.
After login you will redirect to your dashboard and from “Management” Menu click on “Certificates” as shown below
To Create G-Mark LVD eCertificate from conformity certificate listing page click on “+G-Mark LV Certificate” as shown below
You should be a Notified Body Representative to see this Button.
You will redirect to the eCertificate Creation form as shown below
Certificate form Divided into 5 sections as below
1- Certification Body Section
This Section Contains:
Certification Body - you will find your notified bodies that you are represent.
Certificate Internal Reference Number - This is an optional field to your Certificate Internal Reference Number.
2- Product Details Section
This Section will Contain all your Product information as below
Manufacturer - To Select EO Manufacturer Profile.
Authorized Representative - To Select EO Authorized Representative Profile. (Optional Field)
Product Category - To Select your Product Category or Suggest a New Category.
Product Scope - To Select your Product Scope or Suggest a New Scope.
Product Description - The product description shall match the one on the label/plate/packaging.
Trademark/Brand - Enter Product Brand.
Product HS Code - Gulf 8 digits HS Code.
Models - To add your Product Models.
Factory - To Select EO Factory Profile.
Countries Considered.
Rated Voltage.
Rated Voltage 3 Phase.
Rated Frequency.
Capacity - In case of same model having different capacities (Ex:10kg Wash/5kg Dry), enter "10/5" and specify the details in the "Additional Technical Specifications" section.
Validations: Capacity is Mandatory for:
Clothes washing machines
Spin extractors
Tumble dryers
Washer-dryers
Storage water heaters
Refrigerating appliances
Power.
Dimensions - L = Length - W= Width - H= Height.
Models Cannot be overlapping for the following fields:
Rated Voltage 3 Phase.
Rated Frequency.
Capacity.
Power.
Dimensions.
Additional Technical Specifications
In this part of product details section you can add any Additional Technical Specifications by adding Specification Name and Value and select the Models.
Product Photos
Here you will upload the product photo by browsing and adding photos or by drag and drop.
after uploading the photos you will be able to select the Photo Class and Product Model as shown below
3- Standards Applied Section
In this section you will find all related Harmonized Standards to selected Category & Scope
and you can also add additional standards used for evaluation.
4- Documents Section
The following table showing the Documents type we have and if it’s Mandatory and show the document on Certificate
Document Type | Always mandatory | Show on Certificate |
|---|---|---|
EO Application | No | No. |
Lab Accreditation | No | No |
NB Invoice or Service Offer | No | No |
Brand Ownership | No | No |
CR/License | No | No |
Evaluation Report | Yes | Yes |
Safety Test Report | Yes | Yes |
EMC Test Report | No | Yes |
User Guide | Yes | No |
After uploading your documents you have to:
Select Document Type.
Enter Document Reference Number.
Enter Document Issue Date.
5- Additional Information
This is a Free Text Area to add Additional information about your products.
After filling your certificate and product details click on “Create Certificate” at the bottom of the page as shown below
You will move to the top of the page and will see a successful message of certificate creation as shown below
In case Certificate has validation error you will see error message as shown below
You can go through the creation form to see all errors as shown below
And you can submit your form again after enter/correct your Data.